Hasulith multi-purpose jewelry adhesive is a good alternative to Strass 244 when you want to glue rhinestones larger than 5mm. This glue will also dry clear, gluing borders or some excess of adhesive will be nearly invisible. While this adhesive is great for gluing rhinestones, we want to remind you that the strongest adhesive you can get will always be 2-part epoxy glue. But if you choose the convenience of working with only 1 component, this is a good adhesive for you.

30ml

Besides rhinestones Hasulith will also work with many other materials:  metals, glass, ceramics and china, stone, leather, wood, felt, fabrics, paper, cardboard and some hard plastics (like e.g. Polyacrylates (Plexi), ABS and Celluloseacetates)

Your rhinestones should be made of crystal or glass (not plastic) and be larger than 5mm.

Not recommended for gluing materials like PVC, PET, Styropor®, PE, PP, rubber, nylon or soft plastics.

Make sure your surfaces are clean and clean (oil-free). For optimum gluing results it is important that the surfaces to be joined fit well together. HASULITH is put on one side of the parts to be joined. If one or both parts are absorbent materials (e.g. felt, leather, fabrics) the adhesive should be put on both parts. After putting on the adhesive, the parts should be joined immediately with slight pressure. Excesses of adhesive should be removed (e.g. with a cloth) if necessary. Afterwards the gluing should be allowed to get dry on ambient temperature without mechanical stress. Small projects are ready to handle with care after 1 hour, but you should allow up to 12-24 hours for the glue to dry completely.

Remember: you are working with a solvent-based adhesive. Avoid skin contact and make sure your working area is well-ventilated.